• Avoid placing the furniture directly in sunlight as this cause materials to fade or crack. Direct sunlight includes sunlight coming through windows.
• Do not place the furniture too close to a heater appliance as this may distort the material or surface finish
• Do not place the furniture directly against a wall
• Colored textiles may rub off
• If possible, rotate cushions regularly to even wear and fading
• Always keep the room in which your furniture is placed ventilated for normal humidity
• Innovation Living™ furniture is not warranted for outdoor use. Continual exposure in damp or wet environment will cause corrosion

• Keep the textile clean for dust and dirt by regularly vacuum cleaning.
• If your furniture is stained with beverages, food or the like, immediately wipe as much off as possible using a clean cotton cloth. If a stain remains, apply mild detergent foam with a soft brush or sponge in circular motions. The clean spot can be dried with a hair dryer using warm air only. Vacuum your furniture when the clean spot is dry. Remember to always pre-test on a small area not too obvious to the eye.
• For more difficult stains as blood, oil, ink, etc., please contact a professional dry cleaner.

• Keep the textile clean for dust and dirt by regularly careful vacuum cleaning, or by using a soft brush. Remove light spots with lukewarm water followed by immediately using a dry cloth.
• Use only water-based cleaning agents since cleaning agents contain chemicals that may discolors or cracks in the surface.

Like other natural materials leather will over time fade being exposed to sunlight and high heat. Therefore, furniture should not be exposed to direct sunlight or direct heat from heat appliances. Generally, natural leather lasts longer if it is cleaned and maintained regularly. Use cleaning agents intended for leather furniture only.

Several Innovation Living™’s models have wooden legs and/or arms. As wood is a natural living material that continues to work over time, its color and surface change according to the use of the furniture. Wood must be protected from direct sunlight to reduce fade.

• Dust regularly with a soft cloth.
• Never use scouring agents on metallic surfaces.
• Repair damaged surfaces immediately to prevent corrosion.
• Chrome and stainless steel can be treated and cleaned with a suitable cleaning agent – please consult an export for advice.

Innovation Living™’s comfort range consists of several options, each a unique combination of layers and materials. This offers an optimal choice for various needs and user types.

Fiberfill in Innovation Living mattresses are developed to improve a better comfort, longer durability and a more environmental-friendly mattress. Fiberfill is a strong material ensuring similar mattress form and an effective transportation of humidity. Simultaneously, fiberfill is more resistant towards i.e. humidity, blemish and eventual ignition.

The composition of the mattresses and its flexible materials improve the mattresses lifetime and make them ideal for use in sofa beds and beds with elevation. Fiberfill is moreover a low CO2-emisson material that at the same time is recyclable and Oeko-Tex certified. This means less resource consumption and ensures a lighter mattress.

Make sure to lightly beat the mattress regularly. This will maintain the mattress in shape and further keep its comfort. Along with this, always keep a decent indoor climate by regularly ventilate the room where the furniture is placed as high humidity will reduce the mattress’s durability and comfort. Please, contact your local Innovation Living dealer for further information about maintenance.